Cleanse normally
Wash away makeup, sunscreen, and obvious surface dirt with your usual cleanser, then rinse.
Tracked shippingSecure order statusCustomer support
Detailed routine guide
How SONA works—from wet skin to finished routine.
SONA uses a smooth SUS304 stainless-steel working edge and 26,000 high-frequency movements per second. The water layer is essential: it helps the head glide while the movement helps loosen oil and everyday surface residue.
Before you begin
Set up the device correctly.
- Charge first.A full USB charge takes approximately 1–2 hours. Keep the charging port completely dry.
- Remove makeup and cleanse.SONA is a focused second step, not a replacement for washing the face.
- Inspect the skin.Do not use on broken, irritated, sunburned, or recently treated skin.
- Read the included manual.Use the four labeled modes and silicone cover only as directed for your device.
The complete routine
Eight clear steps.
Keep every pass light and controlled. More pressure does not create a better cleanse.
Wet the working area
Apply a generous layer of clean water. The nose, chin, or cheek should remain visibly wet before the blade touches it.
Power on and select the setting
For the cleansing step shown here, select Cleaning. Use Lifting, Ion+, and Ion− only according to the included manual.
Set a shallow angle
Rest the stainless-steel edge lightly against wet skin. Keep the body tilted so the edge can glide instead of pressing straight down.
Glide slowly outward
Move in controlled outward passes across the nose, chin, and cheeks. Avoid the eye area, lips, and any sensitive or damaged spot.
Re-wet whenever needed
If the edge begins to drag or the water layer disappears, stop and apply more water before continuing.
Rinse and hydrate
When finished, rinse the skin and follow with your preferred hydrating serum or moisturizer.
Clean the head—not the body
Power off, wipe the stainless-steel head clean, and dry it. SONA is IPX0: never submerge or rinse the device body.
What happens at the edge
The water layer is part of the mechanism.
The stainless-steel spatula moves across thoroughly wet skin at 26,000 high-frequency movements per second. That controlled movement helps loosen surface oil and residue while the smooth edge glides without grainy scrub particles.
- Working surface
- SUS304 stainless steel
- Frequency
- 26,000 movements/second
- Pressure
- Light and controlled
- Required contact
- Thoroughly wet skin
Control panel
What the four labels mean.
The device includes four selectable settings. The included manual remains the final instruction for how and when to use each one.
Care and safety
Protect your skin and the device.
- Never use the spatula on dry skin.
- Do not press hard or hold the edge in one place.
- Avoid the eye area and stop if discomfort occurs.
- Do not use on broken, irritated, sunburned, or recently treated skin.
- IPX0 means the body is not waterproof—no shower use, submerging, or rinsing.
- This cosmetic tool is not intended to diagnose or treat a medical condition.